Site hosted by Angelfire.com: Build your free website today!
Used Ford Expedition 2003 Facts
1 Used Ford Expedition 2003 Loading
2 Used Ford Expedition 2003 Loading
3 Used Ford Expedition 2003 Loading
4 Used Ford Expedition 2003 Loading
5 Used Ford Expedition 2003 Loading
6 Used Ford Expedition 2003 Loading
Used Ford Expedition 2003 Facts in Answers
Should we buy this used 2003 Ford Expedition? We are considering a 2003 Ford Expedition with about 35,000 miles on it.. My husband did a test drive and liked it... Is the Ford Expedition a safe a reliable vehicle? Would you buy it? Why or why not?

Kat__hleen replied: "go to to get a review of that specific make model and year (for FREE) but the mileage sounds good (hell I put that much on a car in a YEAR, let alone 3+ years). As for whether you should buy it, depends on asking price too, you didn't mention how much, or whether you thought it was in your budget, the website I gave you will also tell you a fair price for that vehicle, so I hope that helps you make your decision more than asking a bunch of strangers on yahoo... also if you like it buy it!!!"

JoeSchmoe06 replied: "i dislike anything ford makes, so i won't comment on the vehicle's reliability. however, you should probably consider the fuel costs for filling up a large vehicle such as that. if you could get by with something smaller or more fuel efficient, there's less chance of regretting your purchase every time you stop at the pump."

andrew b replied: "ya ford make some of the best SUVs car and truck i have Had my ford truck for a loing time it has 200,000km and still going like new!!! don't LET THEM TELL U IT A GAS HOG its not bad and don't buy anthing GMC OR CHEVY it all crap i Had a Chevy and it was new and the transmission was replaced on warranty 7 times!!!!!"

luther replied: "My brother had one,at 50,000 he needed about $1200.00 worth of repairs--ball joints, differential work and other things I can't recall,also used lots of fuel. I would consider it a poor choice for a reasonable person."

mike replied: "Hi, The best way is to see for yourself. Here are 10 of the key things to look for at the dealership or private sale: First, check out the body of the car, looking beyond the styling and paying attention to the details. 1. Look at the seams. Check the gaps between body panels. Are the gaps uniform throughout? A well-engineered and constructed car will show the same body gaps around the doors, the trunk and the hood. Pay particular attention to this on vehicles that have been significantly redesigned or are all new to the market. Although the old adage about not buying a redesigned model in the first year generally no longer applies, varying body gaps may indicate the assembly process needs some adjusting. 2. Match colors. Pay attention to the places on the body where different materials are used, such as where a nose made of a composite plastic material meets the steel of the rest of the body. The paint should not noticeably change hue from one surface to another. 3. What lies beneath? Look under the car to see what protrusions, particularly at the front, could get hung up on parking berms and rip free. Most cars have some sort of air dam underneath the vehicle at the front to aid in cutting aerodynamic drag. But such air dams should be mounted far enough back so parking berms won't rip them off or should be mounted in such a way as to bend rather than break when encountering an object. 4. Under the hood. Even if you're no mechanic, closely inspect the engine bay. Most cars have a cover that surrounds most of the top of the engine. Make sure it's mounted securely -- you shouldn't be able to shake it. The same test should apply to any battery covering. Look at the wiring. It should be either covered or tightly bound together to prevent anything from coming loose. Check for engine and transmission oil leaks. 5. Eye the glass. Look at the window glass and see how the side windows fit against the rubber gaskets when closed. Anything less than a perfect fit will result in wind noise that will only get worse as the car ages. 6. Door "thunk". Open and close the doors, looking for how many so-called "stops" are built into the hinges. A vehicle's door should have two settings so that it will stay open in a half-way position and fully opened. Shut the door and listen for any sort of hollow boom, which could indicate there's less sound-deadening material in the door, which will mean greater road noise. 7. Interior design. Check out the finish on the interior panels. While plastic is the industry norm when it comes to door panels and dashboards, there's a wide variety of grains and finishes applied to the plastic. The dash and panels should have a rich-looking color and have a textured feel to the casual touch. As with the body, the gaps between interior panels should be close and uniform. Look especially where the air bags are hidden. 8. Exposed wiring. If the car you're interested in has power-adjustable front seats, feel under them to see how the wiring and motor coverings are secured. Loose wires or coverings could lead to problems in the future. 9. Little things mean a lot. Pay attention to things like seat latches. They should work with minimal effort and all handles should feel secure, not prone to bending or twisting. Check the stitching and seams of the seats for any loose threads or less-than-straight sewing. Open the trunk and see how the floor covering is secured and whether it's made of a material that will stand up to carrying heavy or dirty cargo. 10. Serious test drive. Lastly, when you've all but settled on the vehicle you want, take an extended test drive, not just a spin around the block. Drive at freeway speeds and pay attention to wind and road noise. Pay attention to how the automatic transmission shifts. It should change gears smoothly and quickly. On a manual transmission, feel where the clutch starts to engage and how long or short the pedal travel is. It should engage gradually and not have any abrupt lurches. Find a safe area to test the brakes. You're not so much looking for what the car will do in a panic stop, but rather how the brakes feel when you apply the pedal. Depending on how far the pedal travels, the feel of the brakes should inspire confidence that the vehicle will stop in a relatively short distance. All of this may sound like a no-brainer step to buying a car, but according to a recent study, more than 40 percent of new car buyers closed the deal without even taking a short test drive. Smart buyers will pay attention to every aspect of a car in order to get a vehicle that will deliver value. Good Luck! Mike"

Where is the keyless entry code on a 2003 Ford Expedition? I have a used 2003 Ford Expedition. I don't have the trucks manual which is where the keyless entry code card usually is. The keyless entry is the 5 button keypad on the door to open the vehicle keylessly. I took off the driverside door panel because inside the door, thats where the memorybox usually is on Most Fords, which has a 5 digit sticker on it that is the actual code. In this case, the Memory box isn't inside the door. At least, I could'nt find it there. Anyone knows where the memory box which has a sticker of the keyless entry code sticker on it is??

DERECK A replied: "they usually come with the manual. in this case the best way to get it is through Ford dealership. you can go there with the vin number. they with either programm it or show you how to get it. it might cost you though."

gearbox1 replied: "The module in the door is only for the full size cars for the key code... I could say bring it to the dealer.. but If you took a door panel off of one of these and not broke anything.. I'll be nice... Pull glove box door down, get a good flashlight.. you will need it.... sneak hand into wiring on the right hand side where it's almost touching the body on the right side.. there is a module back there (basically all the way to the back on the right side) with a 5 digit code... it's a difficult think to view.. but can be done without removing anything..... just takes a bend in the right direction to view"

justcurious replied: "Any ford dealership can pull it out if the trucks computer. It is not physically on it anywhere."

51 replied: "Open the right/rear door. Pull the body weatherstrip back a little. Fold down the right/rear seatback. Pull the panel where the right/rear seatbelt anchors to the top, with the sliding height adjuster. Pull back the lower panel just until you can see the Vehicle Security Module with the three electrical connectors coloured green, blue, and grey. There is a label with the number 5L2T-15K602-EA. You will also see FIVE numbers. That is your five digit keypad entry code."

BillyTheKid replied: "Check the hinge on the rear hatch for a little white sticker with the numbers on it. Let us know where you DO find it! Why did they even have those since they had the keyless entry key fob?"

What size alan key is used to change the brakes on a 2003 Ford Expedition? I have a set of alan keys but i need the size in between 1/4th and 5/16th any ideas where to get them Lowes, Home Depot, Auto Zone and Advanced Auto dont have em.

kelly_f_1999 replied: "well guess.. sorry if you dont have one that size then go to a auto parts store and just tell them your working on brake for ford and need a alan wrench or buy a larger set of"

Satan replied: "There is no standard size between 1/4 and 5/16. You should try metric sizes. Possibly/probably a 6mm key, I'd guess. FYI, most bolts on American vehicles have used metric sizing since the late 80s/early 90s. Hope this helps."

How do you refurbish the side panelling for 2003 Ford Expedition? I drive a Ford Expedition 2003. The the siding is dry and doesn't shine as it once did when new. I have been using wheel shine to get it to shine but with not very good results. What may be the best product or technique to shine the door siding???????

horsiedaisy replied: "Pure Magic will do"

2003 Ford Expedition? Is there a wheel adapter for the 03 expedition, I have a set of rims that are 6x139 wondering if they can be used for the 03 expedition bolt pattern of 6x135

*blueyedblonde* replied: "sorry i have no idea."

CxeLady replied: "Call your local Ford dealer. They can answer your question."

Silly replied: "try it, its the only way to find out"

big_blue_oval replied: "am sure there is a wheel adapter but i am dead set against them.For one thing when you use a wheel adapter you are moving wheel out to clear the adapter with puts more wear and tear on bearings.Also most adapters are set up so you can't check to make sure that the lug nuts holding the adapter because they are under the rim"

eaglefox200 replied: "Since this is an aftermarket wheel, meaning it wasn't made by Ford Motor Company, I'd take it to the place you bought it. Tire and wheel shops have a lot of fitment guides. I also agree that I would not use the wheels. Using anything that doesn't come from the factory can (but not necessarily will) void your warranty or if something breaks you're pretty much on your own."

ford expedition keypad help? i have a ford expedition with the keypad. i dont have the code cause i bought it used. i seen the ads on ebay staying that i could buy the rest pass code its cheap but is it possible? its a ford expedition 2003

deljack05 replied: "Take it to the Ford dealership with proof of ownership and they can get it for you using the VIN number."

Larry F replied: "The dealer can get the code for you from the VIN number. There is also a program code that allows you to change from the original code, just in CASE the former owner came after the car later."

How do I go about removing a gem module on a 2003 Ford Expedition? Here's the long and the short of it. I had my windshield replaced yesterday by a company due the fact a rock had cracked it this paste weekend. Key point: I had never had the following issue with my Expy until then. After the windshield had been installed, I was told not to move the vehicle for 1 hour, and the tech left. I stuck my head out the door, and hit lock on the remote twice just to make sure it was locked(I was at work). The vehicle didn't beep. This was odd since I punched the remote twice. So I walked out too it, trying to beep the horn with the remote the whole way. No luck. When I got out to it, I opened the door and found that the dash warning lights were all on, heater fan was blowing, and the radio was powered up. I had never seen anything like this, so I put the key in the ignition and tried to start it. Nothing. No turnover, nada. Called the glass company and they sent their tech back, but all he wanted to say was that it wasn't his fault, yada yada yada. He had the doors open while he was doing it, so I though he might have just killed the battery. But we tried to jump it off, nothing. Had a mechanic come out and check the battery itself, nothing. Plenty of charge. The local garage mentioned that he had heard about there being a lot of problems with GEM's, and that might be it. So I came home last night and started reading on the net. Sure enough, all the symptons I'm having are just like what people who have had them go bad dealt with. My hypothesis is that when he broke the old windshield loose, the snow and moisture that had accumalated ran down the a-pillar and fried the GEM(it had flurried here all morning. I made it clear to the glass company that we could use shelter, but the tech never asked). So here's the root of my question. I called the dealer and was told that a new GEM module would be $208, and a new fusebox would be $190.41(these apparently are also a problem, and while this is being done, logic says change it.) Labor to put them is would be $280, for a grand total of $680. So here's what I want to know: *Would it be easier for me to remove the gem and replace it myself? It seems easy to get to, but if it has to be reprogramed, is there any point in me doing it? *Should I also replace the fusebox as well, or would that be a waste of money. Note that the dealer or mechanic haven't actually had it out yet, so I assume they'll know if it's messed up. *Does the water from the windshield theory make sense? I had never had any problem with them occuring UNTIL that windshield was broke loose. Someone let me know. I appreciate the help.

144289 replied: "Seen many gem's go out because of windshield leaking on them. Unhooked battery, remove 2 large wire harness connectors on back of fuse box, remove screws in front that hold fuse box, watch, slowing remove fuse box, and unplug gem module wires, then remove fuse box and gem together, make sure that there is no water in the fuse box also."

How do i sell a used car that i just dont want? I have a Ford expedition 2003 the mileage is 99424 and i owe on it. $17500... gosh i just don't know how to go about, selling it.

Fred C replied: "You might have to drive it a little longer, the average resale is actually a little lower than your pay-out. ($15,504) I assume you are in the US."

dodge man replied: "you can run it in your local auto trader an it will eventually sell from there,people are always looking for one to buy,but i have sold a lot from our local auto trader before,and its usually local people that buy them also,good luck selling it."

setter505 replied: "your vehicle only books at about 11 to 12 thousand so your either ganna take a big loss or you could trade it in on a more expensive vehicle and try to make a deal , but they will probably take you for all you got if you owe that much. you may just want to keep it."

david c replied: "Try trading it in some dealers will pay for the amount you owe and more its worth a try or try it free and effective"

99 ford expedition eddie bauer factory radio? hello, need to know what model years are interchangeable when looking to replace the factory radio in my 99 expedition eddie bauer. my has the factory cd changer in between the front seats, rear radio controls. i took out the after market radio, factory wiring is there the factory radio would use three separate plugs. looking at a 2003 expedition eddie bauer radio but don't know if will work in mine? thanks for any info! mike

Scott W replied: "look at the plugs and how it bolts up.the plugs only go in one way and you can call a salvage yard most of them can tell you or the dealer."

Gordy replied: "Your best bet, would be to try & match up the part numbers, to see if they interchange. Most likely it is very similair, but wiring harness may be different."

conejote_99 replied: "1998 to 2002 have the same plugs you can find it in tape with cd changer controls cd with cd changer controls dual media tape and cd with cd changer controls and CD6 sometimes with cd changer controls but most don't have controls for the external cd changer when you press the cd button it needs to show NO DJ OR NO CD"

Popular Links
Tags
Used Ford Expedition 2003 © 2009